How to Use an Embroidery Hoop:
Loosen the screw or nut on the outer embroidery hoop and separate the inner and outer rings. The outer ring will hold the fabric over the inner ring once you have inserted the fabric.
Place the inner ring on a flat surface. Place your fabric over it, then put the outer ring over the fabric and press until the bottom ring is snug inside the outer ring. Tug the corners of the fabric slightly to make the fabric taunt – make sure this is as tight as possible so the fabric won’t slip out of the hoop.
Tighten the nut or screw securely. Your fabric is now in place and ready to embroider.
TIP: Never leave your work in the hoop for an extended period of time. This can cause creases in the fabric that are difficult to remove. It is best to take your work out of the hoop when you’re not working on it, as it only takes a moment to place it back in the hoop.